Wirelessgy
プロトタイプ開発会社

3

Working demonstrators

~1

Bench range in metres

0

Independent measurements

2,500

利用可能なユニット

予約プロトタイプ $500.00

2,500 予約枠 - 数量限定

Registered legal entities only. Company name, PIB and MBR are required at checkout. Consumers cannot reserve a unit.

Engineering status

Built and demonstrated. Not yet independently measured.

Built by a founder with an M.Sc. in electrical and computer engineering. The prototype couples a transmitter and a receiver through an oscillating electric field between conductive surfaces, so there is no coil pair and nothing to align. Bench observations indicate power transfer at roughly one metre. These are founder-observed results on hand-built hardware, presented as indicative only, pending independent measurement.

Demonstrated on video

Three functional demonstrators: a bench transmitter and receiver pair, a cordless LED lamp, and a USB charging puck. Named in the United Inventors Association UIA Inspire Top 24 of 2024 - recognition of the concept, not a technical measurement.

Non-magnetic coupling

Operates without induction coils, 磁気結合, or directed energy beams.

Not independently verified

Efficiency, range and field-exposure figures have not been replicated or measured to a published protocol by any third party.

Not certified

No FCC, CE or other certification. Informal checks with consumer devices in and around the field showed no observable disruption, but formal EMC and human-exposure measurement has not been carried out.

技術概要

長距離無線エネルギー伝送

A non-magnetic, 非誘導方式による空気中での電気エネルギー伝送, materials and confined spaces.

This prototype demonstrates an energy-transfer principle without magnetic resonance, コイル, RFビーム, lasers or direct conductors. The category is not empty: Qi pads use magnetic induction over millimetres, WiTricity licenses magnetic resonance over tens of centimetres, Energous and Ossia deliver milliwatt-level RF at a few metres, and Wi-Charge ships infrared systems needing line of sight. Each of those ships today and holds certifications this project does not. What differs here is the coupling mechanism, the absence of an alignment requirement, and behaviour in water. Bench observations by the founder indicate transfer at roughly one metre; no third party has replicated or measured them to a published protocol.

予約プロトタイプ $500.00

Business customers only - registered legal entities with a valid PIB and MBR.

ワイヤレス給電技術
エンジニアリングとコンプライアンス

Safety and exposure - the open questions

Human exposure and electromagnetic interference are the constraints that decide how much power this method may legally move. Neither has been measured.

Supplied for experimental and research use only. このプロトタイプは <強力>no FCC, CE or other certification. Thermal behaviour, 信号封じ込め, cross-material propagation and controlled output are all unquantified. Nothing here should be read as a safety claim.

重要: Units are supplied only to registered legal entities for their own research and testing, never to consumers. The buying company is responsible for safe handling, for restricting access to qualified staff, and for compliance with the regulations of its own jurisdiction. 当社は、その使用に起因する傷害、損害、またはその他の結果について一切の責任または義務を負いません, 損害, またはその他の結果.

予約プロトタイプ $500.00
プロトタイプテスト
生産および予約サイクル

Prototype batch manufacturing - FIFO allocation

Reserve your company a place in the initial engineering prototype batch (2,500). これは研究用のプレプロダクションデバイスです, education and experimental use. 配送は適用される規制に基づき法的に許可された場合のみ行われます.

Reservations are accepted from registered legal entities only. Company name, tax identification number (PIB) and company registration number (MBR) are required. Consumer orders are not accepted and will be refunded. 限定数量 (2,500). 配送時期は法的許可と生産準備状況に依存します. 各予約にはユニット価格の20％のキャンセル不可手数料が必要です ($500.00 の $2,500.00 USD). 必要な予約がすべて完了した後, 参加者は製造開始前に残りの代金残高を支払います. 割り当ては先着順（FIFO）で行われます. バッチ全体が資金調達され、配送が法的に許可されるまで個別ユニットの発送は行われません.

The buying company acknowledges that this is a research prototype, not a certified commercial product, with no independently measured performance figures. 仕様はエンジニアリングの反復中に進化する可能性があります. A published, third-party test report is the milestone this project is working towards, and reservations fund that work.

重要: 配送は法的に許可された場合のみ行われます. No claim is made here about efficiency, range or safe exposure levels beyond what has been observed on the bench. 当社は遅延について一切の責任を負いません, 規制上の制限, または実験的使用の結果について.

予約プロトタイプ $500.00
生産と配送サイクル
Why say it this way

Open to scrutiny

A one-person hardware project with a working prototype and no independent measurements. What it needs next is a laboratory willing to measure it and an engineer willing to sign the result. The reservation batch is open to companies who want a unit on their own bench while that work is done.

Coupling

What is claimed

Power transfer at roughly one metre, observed on the bench, with no alignment and improved behaviour in water.

Construction

What is not claimed

No efficiency, range or exposure figure has been measured to a protocol, and no certification exists.

Why say so openly

Stating the limits

An unmeasured claim is worth nothing to a serious laboratory or industrial buyer. The buying company acknowledges the experimental nature of the device and accepts the usage risk on its own account.

Open to measurement

早期予約と参加

Secure your company a place in the FIFO batch (2,500). Reservations are open to registered legal entities only - company name, PIB and MBR are required.

予約プロトタイプ $500.00

2,500 限定プロトタイプ枠. Registered legal entities only. 予約は即時配送を保証するものではありません.

Validation roadmap

What has been demonstrated, and what comes next

The first three items have been built and recorded. The remaining three have not been carried out. A published third-party test report is the asset this project needs next, and the reservation batch is what funds it.

プロトタイプテスト

Done - bench transfer

A transmitter and receiver pair moving power across open space at roughly one metre, recorded on video. Founder-observed, not measured to a protocol.

エンジニアリング評価

Partly - informal checks only

Consumer devices placed in and around the field showed no observable disruption. That is a smoke test, not a measurement. Formal pre-compliance against FCC Part 18 and IEC 62311 remains outstanding.

実験的安全実証

Not done - instrumented bench test

Calibrated power in and out, with an efficiency-versus-distance curve and error bars, repeated across builds.

水中プロトタイプテスト

Done - submerged transfer

Power moved between two sealed electrodes in a water bath - the case induction cannot serve. Recorded, not quantified.

異素材間テスト

Done - two receivers, one transmitter

A cordless LED lamp and a USB charging puck running together anywhere on the same plastic surface, with no alignment and no touchable metal.

異なるプロトタイプ

Not done - independent replication

A university electrical engineering department or accredited test house rebuilding and re-measuring to the same protocol.

予約プロトタイプ $500.00

2,500 限定プロトタイプ枠. Registered legal entities only. 予約は即時納品を保証するものではありませんが、優先FIFO割り当てを保証します.

FAQ

よくある質問

ワイヤレスプロトタイプFAQ
  • Who is allowed to reserve a unit?

    Registered legal entities only. Reservations are accepted from companies, institutes, universities and other registered organisations acting in the course of their business or research activity. Company name, tax identification number (PIB) and company registration number (MBR) are mandatory at checkout. Private individuals acting as consumers cannot reserve a unit. Orders that turn out to have been placed by a consumer are cancelled and refunded in full.

  • 私の予約には何が含まれますか ($500.00)?

    予約により初期ユニットプロトタイプバッチでの優先枠が確保されます (2,500). 返金不可. そして、先入れ先出し（FIFO）割り当てにおける優先順位を保証します. 最終的な配送は、バッチ全体が資金調達され、法的に配送が許可された場合にのみ行われます.

  • 残りの残高はいつ支払いますか?

    $2,000.00 残りの残高は、すべての予約が集められた後にのみ請求されます (2,500), そして、規制当局の承認または法的な配送許可が確認されます, これは安全性とコンプライアンスを確保します.

  • What exactly has been proven?

    Three demonstrators have been built and recorded on video: a bench transmitter and receiver pair, a cordless LED lamp, and a USB charging puck. Power transfer at roughly one metre has been observed on the bench by the founder. No third party has measured any of it.

  • Is it certified or safety tested?

    いいえ. There is no FCC, CE or other certification. Formal EMC and human-exposure assessment against FCC Part 18 and IEC 62311 has not been carried out. Informal checks with consumer devices showed no observable disruption, but that is not a measurement, and until one exists no claim about safe operating power levels can be made. This is precisely why units are supplied only to registered organisations for their own testing, never to consumers.

  • What about the patent?

    There is no live application. A utility provisional was filed with the USPTO under 35 U.S.C. 111(b) but was not converted within the twelve-month window, so there is no priority date today. An unconverted provisional is never published, so the implementation has not entered the public record. Patentability and freedom-to-operate opinions come before any new filing.

  • 法的制限により配送が遅れた場合はどうなりますか?

    配送は法的に許可された場合にのみ行われます. 予約することで, the buying company acknowledges that timing depends on independent measurement and regulatory clearance, not on an internal schedule.

ステップ1 - 完了

作業プロセス

このプロジェクトは制御された, 段階的な開発サイクルに従います. 各フェーズは研究に焦点を当てています, 検証, そして改良により、安全な, 実験的, そしてプロトタイプデバイスの教育的な使用を確保します.

研究フェーズ

無線エネルギー伝送原理の初期研究と理論的モデリング, プロトタイプの実現可能性と安全性の考慮事項の評価.

ステップ2 - 完了

プロトタイプ設計と発見

反復設計, テスト, 最適な構成の発見. 初期プロトタイプは実験室評価のために構築される, 熱安定性, 信号封じ込め, 制御されたエネルギー出力.

発見フェーズ

エンジニアリングの反復により設計パラメータを洗練し、環境相互作用を評価して概念的に安全な実験的使用を確保する.

ステップ3 - 保留中

Validation - pending

Independent measurement, safety review and a repeatable build. Focus is on independent measurement, EMC pre-compliance and a repeatable reference design, alongside FIFO allocation of the reserved batch (2,500).

プロトタイプ検証

すべての予約は追跡される, and independent measurement plus regulatory clearance are addressed before requesting the remaining payment and starting manufacturing.

  1. 研究

    長距離無線エネルギー伝送の理論的および実験的原理の探求.

  2. 発見

    Exploring methods, materials and energy-transfer behaviours on the bench.

  3. プロトタイプ設計

    実験的および教育的使用のための初期テストプロトタイプの構築.

  4. 検証

    Independent laboratory measurement - not yet carried out.

  5. Batch planning

    予約の整理, 先入れ先出し割り当て, 生産準備完了のプロトタイプ製造の準備.

  6. 生産前

    Completing EMC and human-exposure testing before the final balance payment is requested and any unit is delivered.