Wirelessgy
Prototüübiarendusettevõte

3

Working demonstrators

~1

Bench range in metres

0

Independent measurements

2,500

Saadaolevad ühikud

Reservprototüüp $500.00

2,500 broneeringuajad - piiratud kättesaadavus

Registered legal entities only. Company name, PIB and MBR are required at checkout. Consumers cannot reserve a unit.

Engineering status

Built and demonstrated. Not yet independently measured.

Built by a founder with an M.Sc. in electrical and computer engineering. The prototype couples a transmitter and a receiver through an oscillating electric field between conductive surfaces, so there is no coil pair and nothing to align. Bench observations indicate power transfer at roughly one metre. These are founder-observed results on hand-built hardware, presented as indicative only, pending independent measurement.

Demonstrated on video

Three functional demonstrators: a bench transmitter and receiver pair, a cordless LED lamp, and a USB charging puck. Named in the United Inventors Association UIA Inspire Top 24 of 2024 - recognition of the concept, not a technical measurement.

Non-magnetic coupling

Operates without induction coils, magnetiline sidestus, or directed energy beams.

Not independently verified

Efficiency, range and field-exposure figures have not been replicated or measured to a published protocol by any third party.

Not certified

No FCC, CE or other certification. Informal checks with consumer devices in and around the field showed no observable disruption, but formal EMC and human-exposure measurement has not been carried out.

Tehnoloogia ülevaade

Pikkmaaaline Traadita Energiaülekanne

A non-magnetic, mittetahteline meetod elektrilise energia ülekandmiseks läbi õhu, materials and confined spaces.

This prototype demonstrates an energy-transfer principle without magnetic resonance, mähised, RF kiired, lasers or direct conductors. The category is not empty: Qi pads use magnetic induction over millimetres, WiTricity licenses magnetic resonance over tens of centimetres, Energous and Ossia deliver milliwatt-level RF at a few metres, and Wi-Charge ships infrared systems needing line of sight. Each of those ships today and holds certifications this project does not. What differs here is the coupling mechanism, the absence of an alignment requirement, and behaviour in water. Bench observations by the founder indicate transfer at roughly one metre; no third party has replicated or measured them to a published protocol.

Reservprototüüp $500.00

Business customers only - registered legal entities with a valid PIB and MBR.

Traadita võimsustehnoloogia
Inseneriteadus ja vastavus

Safety and exposure - the open questions

Human exposure and electromagnetic interference are the constraints that decide how much power this method may legally move. Neither has been measured.

Supplied for experimental and research use only. see prototüüp on no FCC, CE or other certification. Thermal behaviour, signaali piirang, cross-material propagation and controlled output are all unquantified. Nothing here should be read as a safety claim.

Oluline: Units are supplied only to registered legal entities for their own research and testing, never to consumers. The buying company is responsible for safe handling, for restricting access to qualified staff, and for compliance with the regulations of its own jurisdiction. Ettevõte ei võta vastutust vigastuste eest, kahju, või muud selle kasutamisest tulenevad tagajärjed.

Reservprototüüp $500.00
Prototüübi testimine
Tootmise ja broneerimise tsükkel

Prototype batch manufacturing - FIFO allocation

Reserve your company a place in the initial engineering prototype batch (2,500). See on eeltootmisseade uurimiseks, education and experimental use. Tarnetamine toimub ainult siis kui see on vastavate eeskirjade kohaselt seaduslikult lubatud.

Reservations are accepted from registered legal entities only. Company name, tax identification number (PIB) and company registration number (MBR) are required. Consumer orders are not accepted and will be refunded. Piiratud kättesaadavus (2,500). Tarneaeg sõltub seaduslikust lubamisest ja tootmisvalmidusest. Iga broneering nõuab tagastamatu tasu 20% ühikuhinnast ($500.00 of $2,500.00 USD). Kui kõik vajalikud broneeringud on tehtud, osalejad maksavad ülejäänud hinna tasakaalu enne tootmise algust. Jaotamine järgib esimesena sisse esimesena välja FIFO põhimõtet. Üksik ühik ei saadeta enne kui kogu partii on rahastatud ja kohaletoimetamine on seaduslikult lubatud.

The buying company acknowledges that this is a research prototype, not a certified commercial product, with no independently measured performance figures. Spetsifikatsioonid võivad muutuda inseneriiteratsioonide käigus. A published, third-party test report is the milestone this project is working towards, and reservations fund that work.

Oluline: Tarnetamine toimub ainult siis kui see on seaduslikult lubatud. No claim is made here about efficiency, range or safe exposure levels beyond what has been observed on the bench. Ettevõte ei vastuta viivituste eest, regulatiivsed piirangud, eksperimentaalse kasutamise tulemused.

Reservprototüüp $500.00
Tootmise ja tarnitsükli
Why say it this way

Open to scrutiny

A one-person hardware project with a working prototype and no independent measurements. What it needs next is a laboratory willing to measure it and an engineer willing to sign the result. The reservation batch is open to companies who want a unit on their own bench while that work is done.

Coupling

What is claimed

Power transfer at roughly one metre, observed on the bench, with no alignment and improved behaviour in water.

Construction

What is not claimed

No efficiency, range or exposure figure has been measured to a protocol, and no certification exists.

Why say so openly

Stating the limits

An unmeasured claim is worth nothing to a serious laboratory or industrial buyer. The buying company acknowledges the experimental nature of the device and accepts the usage risk on its own account.

Open to measurement

Broneeri varakult ja osale

Secure your company a place in the FIFO batch (2,500). Reservations are open to registered legal entities only - company name, PIB and MBR are required.

Reservprototüüp $500.00

2,500 piiratud prototüüpide arv. Registered legal entities only. Broneering ei garanteeri kohest tarnimist.

Validation roadmap

What has been demonstrated, and what comes next

The first three items have been built and recorded. The remaining three have not been carried out. A published third-party test report is the asset this project needs next, and the reservation batch is what funds it.

Prototüübi testimine

Done - bench transfer

A transmitter and receiver pair moving power across open space at roughly one metre, recorded on video. Founder-observed, not measured to a protocol.

Insenerihindamine

Partly - informal checks only

Consumer devices placed in and around the field showed no observable disruption. That is a smoke test, not a measurement. Formal pre-compliance against FCC Part 18 and IEC 62311 remains outstanding.

Eksperimentaalne ohutuse demonstreerimine

Not done - instrumented bench test

Calibrated power in and out, with an efficiency-versus-distance curve and error bars, repeated across builds.

Allveel proovimine

Done - submerged transfer

Power moved between two sealed electrodes in a water bath - the case induction cannot serve. Recorded, not quantified.

Ristmaterjalide testimine

Done - two receivers, one transmitter

A cordless LED lamp and a USB charging puck running together anywhere on the same plastic surface, with no alignment and no touchable metal.

Erinevad prototüübid

Not done - independent replication

A university electrical engineering department or accredited test house rebuilding and re-measuring to the same protocol.

Reservprototüüp $500.00

2,500 piiratud prototüüpide arv. Registered legal entities only. Broneering ei garanteeri kohest tarnet kuid tagab prioriteetse FIFO jaotuse.

KKK

Korduma kippuvad küsimused

Traadita prototüübi KKK
  • Who is allowed to reserve a unit?

    Registered legal entities only. Reservations are accepted from companies, institutes, universities and other registered organisations acting in the course of their business or research activity. Company name, tax identification number (PIB) and company registration number (MBR) are mandatory at checkout. Private individuals acting as consumers cannot reserve a unit. Orders that turn out to have been placed by a consumer are cancelled and refunded in full.

  • Mida minu broneering hõlmab ($500.00)?

    Broneering tagab teie koha esimeste ühikute prototüüpipartis (2,500). See on tagastamatu. Ja tagab prioriteedi esimesena sisse esimesena välja FIFO jaotamisel. Lõplik tarnimine toimub alles siis kui kogu partii on rahastatud ja seaduslikult saatmiseks lubatud.

  • Millal maksan ülejäänud summa?

    $2,000.00 jääksaldo nõutakse alles pärast kõigi broneeringute kogumist (2,500), ja regulatiivne heakskiit või seaduslik luba saatmiseks on kinnitatud, see tagab ohutuse ja vastavuse.

  • What exactly has been proven?

    Three demonstrators have been built and recorded on video: a bench transmitter and receiver pair, a cordless LED lamp, and a USB charging puck. Power transfer at roughly one metre has been observed on the bench by the founder. No third party has measured any of it.

  • Is it certified or safety tested?

    Ei. There is no FCC, CE or other certification. Formal EMC and human-exposure assessment against FCC Part 18 and IEC 62311 has not been carried out. Informal checks with consumer devices showed no observable disruption, but that is not a measurement, and until one exists no claim about safe operating power levels can be made. This is precisely why units are supplied only to registered organisations for their own testing, never to consumers.

  • What about the patent?

    There is no live application. A utility provisional was filed with the USPTO under 35 U.S.C. 111(b) but was not converted within the twelve-month window, so there is no priority date today. An unconverted provisional is never published, so the implementation has not entered the public record. Patentability and freedom-to-operate opinions come before any new filing.

  • Mis tuleb kui kohaletoimetamine viibib seaduslike piirangute tõttu?

    Kohaletoimetamine toimub ainult siis kui see on seaduslikult lubatud. Broneerides, the buying company acknowledges that timing depends on independent measurement and regulatory clearance, not on an internal schedule.

Esimene samm - tehtud

Tööprotsess

See projekt järgib kontrollitud, astmeline arengutsükkel. Iga faas keskendub uurimisele, valideerimine, ja täiustamine ohutuse tagamiseks, eksperimentaalne, ja prototüübi seadme hariduslik kasutamine.

Uurimisfaas

Esialgne uurimistöö ja teoreetiline modelleerimise traadita energiaülekande põhimõtete kohta, prototüübi teostatavuse ja ohutuse hindamine.

Samm kaks - tehtud

Prototüübi kujundus ja avastamine

Iteratiivne disain, testimine, ja optimaalsete konfiguratsioonide avastamine. Varased prototüübid on loodud laboratoorse hindamise jaoks, termotermiline stabiilsus, signaali piirang, ja kontrollitud energiaväljund.

Avastusfaas

Insenerite iteratsioonid täpsustavad disainiparameetreid ja hindavad keskkonnamõjusid tagamaks kontseptuaalselt ohutut eksperimentaalset kasutamist.

Kolmas samm - ootel

Validation - pending

Independent measurement, safety review and a repeatable build. Focus is on independent measurement, EMC pre-compliance and a repeatable reference design, alongside FIFO allocation of the reserved batch (2,500).

Prototüübi valideerimine

Kõik broneeringud on jälgitavad, and independent measurement plus regulatory clearance are addressed before requesting the remaining payment and starting manufacturing.

  1. Uurimine

    Pikaauguste traadita energiaülekande teoreetiliste ja eksperimentaalsete põhimõtete uurimine.

  2. Avastamine

    Exploring methods, materials and energy-transfer behaviours on the bench.

  3. Prototüübi disain

    Esialgsete testprototüüpide loomine eksperimentaalseks ja hariduslikuks kasutamiseks.

  4. Valideerimine

    Independent laboratory measurement - not yet carried out.

  5. Partside planeerimine

    Broneeringute korraldamine, Esimesena-sisse-esimesena-välja jaotus, ja tootmisvalmis prototüübi valmistamiseks ettevalmistamine.

  6. Eeltoodang

    Completing EMC and human-exposure testing before the final balance payment is requested and any unit is delivered.