Wirelessgy
Prototypenentwicklungsunternehmen

3

Working demonstrators

~1

Bench range in metres

0

Independent measurements

2,500

Verfügbare einheiten

Reserve-prototyp $500.00

2,500 reservierungsslots - begrenzte verfügbarkeit

Registered legal entities only. Company name, PIB and MBR are required at checkout. Consumers cannot reserve a unit.

Engineering status

Built and demonstrated. Not yet independently measured.

Built by a founder with an M.Sc. in electrical and computer engineering. The prototype couples a transmitter and a receiver through an oscillating electric field between conductive surfaces, so there is no coil pair and nothing to align. Bench observations indicate power transfer at roughly one metre. These are founder-observed results on hand-built hardware, presented as indicative only, pending independent measurement.

Demonstrated on video

Three functional demonstrators: a bench transmitter and receiver pair, a cordless LED lamp, and a USB charging puck. Named in the United Inventors Association UIA Inspire Top 24 of 2024 - recognition of the concept, not a technical measurement.

Non-magnetic coupling

Operates without induction coils, Magnetische Kopplung, or directed energy beams.

Not independently verified

Efficiency, range and field-exposure figures have not been replicated or measured to a published protocol by any third party.

Not certified

No FCC, CE or other certification. Informal checks with consumer devices in and around the field showed no observable disruption, but formal EMC and human-exposure measurement has not been carried out.

Technologieübersicht

Langstrecken-Drahtlose Energieübertragung

A non-magnetic, nicht-induktive Methode zur Übertragung elektrischer Energie durch die Luft, materials and confined spaces.

This prototype demonstrates an energy-transfer principle without magnetic resonance, Spulen, RF-Strahlen, lasers or direct conductors. The category is not empty: Qi pads use magnetic induction over millimetres, WiTricity licenses magnetic resonance over tens of centimetres, Energous and Ossia deliver milliwatt-level RF at a few metres, and Wi-Charge ships infrared systems needing line of sight. Each of those ships today and holds certifications this project does not. What differs here is the coupling mechanism, the absence of an alignment requirement, and behaviour in water. Bench observations by the founder indicate transfer at roughly one metre; no third party has replicated or measured them to a published protocol.

Reserve-prototyp $500.00

Business customers only - registered legal entities with a valid PIB and MBR.

Drahtlose stromübertragungstechnologie
Technik und Compliance

Safety and exposure - the open questions

Human exposure and electromagnetic interference are the constraints that decide how much power this method may legally move. Neither has been measured.

Supplied for experimental and research use only. Dieser Prototyp hat no FCC, CE or other certification. Thermal behaviour, Signalldämmung, cross-material propagation and controlled output are all unquantified. Nothing here should be read as a safety claim.

Wichtig: Units are supplied only to registered legal entities for their own research and testing, never to consumers. The buying company is responsible for safe handling, for restricting access to qualified staff, and for compliance with the regulations of its own jurisdiction. Die firma übernimmt keine verantwortung oder haftung für verletzungen, schaden, oder andere folgen aus seiner verwendung.

Reserve-prototyp $500.00
Prototypentest
Produktions- und reservierungszyklus

Prototype batch manufacturing - FIFO allocation

Reserve your company a place in the initial engineering prototype batch (2,500). Dies ist ein Vorserienmodell für Forschungszwecke, education and experimental use. Die Lieferung erfolgt nur wenn sie nach den geltenden Vorschriften rechtlich zulässig ist.

Reservations are accepted from registered legal entities only. Company name, tax identification number (PIB) and company registration number (MBR) are required. Consumer orders are not accepted and will be refunded. Begrenzte verfügbarkeit (2,500). Die lieferzeit hängt von der gesetzlichen frist und der produktionsbereitschaft ab. Jede Reservierung erfordert eine nicht erstattungsfähige Gebühr in Höhe von 20 % des Einzelpreises ($500.00 von $2,500.00 USD). Sobald alle erforderlichen reservierungen abgeschlossen sind, die teilnehmer zahlen den restbetrag vor beginn der fertigung. Die Zuteilung erfolgt nach dem First-In-First-Out FIFO-Prinzip. Keine einzelversendung bis die gesamte charge finanziert und die lieferung rechtlich zulässig ist.

The buying company acknowledges that this is a research prototype, not a certified commercial product, with no independently measured performance figures. Spezifikationen können sich während der entwicklungsiterationen weiterentwickeln. A published, third-party test report is the milestone this project is working towards, and reservations fund that work.

Wichtig: Die lieferung erfolgt nur wenn sie rechtlich zulässig ist. No claim is made here about efficiency, range or safe exposure levels beyond what has been observed on the bench. Das unternehmen übernimmt keine haftung für verzögerungen, regulatorische beschränkungen, oder ergebnisse der experimentellen anwendung.

Reserve-Prototyp $500.00
Produktions- und lieferzyklus
Why say it this way

Open to scrutiny

A one-person hardware project with a working prototype and no independent measurements. What it needs next is a laboratory willing to measure it and an engineer willing to sign the result. The reservation batch is open to companies who want a unit on their own bench while that work is done.

Coupling

What is claimed

Power transfer at roughly one metre, observed on the bench, with no alignment and improved behaviour in water.

Bauwesen

What is not claimed

No efficiency, range or exposure figure has been measured to a protocol, and no certification exists.

Why say so openly

Stating the limits

An unmeasured claim is worth nothing to a serious laboratory or industrial buyer. The buying company acknowledges the experimental nature of the device and accepts the usage risk on its own account.

Open to measurement

Reservieren Sie frühzeitig und nehmen Sie teil

Secure your company a place in the FIFO batch (2,500). Reservations are open to registered legal entities only - company name, PIB and MBR are required.

Reserve-prototyp $500.00

2,500 begrenzte prototypenplätze. Registered legal entities only. Reservierung garantiert keine sofortige lieferung.

Validation roadmap

What has been demonstrated, and what comes next

The first three items have been built and recorded. The remaining three have not been carried out. A published third-party test report is the asset this project needs next, and the reservation batch is what funds it.

Prototypentest

Done - bench transfer

A transmitter and receiver pair moving power across open space at roughly one metre, recorded on video. Founder-observed, not measured to a protocol.

Technische bewertung

Partly - informal checks only

Consumer devices placed in and around the field showed no observable disruption. That is a smoke test, not a measurement. Formal pre-compliance against FCC Part 18 and IEC 62311 remains outstanding.

Experimentelle sicherheitsdemonstration

Not done - instrumented bench test

Calibrated power in and out, with an efficiency-versus-distance curve and error bars, repeated across builds.

Unterwasser-prototypentest

Done - submerged transfer

Power moved between two sealed electrodes in a water bath - the case induction cannot serve. Recorded, not quantified.

Materialübergreifende prüfung

Done - two receivers, one transmitter

A cordless LED lamp and a USB charging puck running together anywhere on the same plastic surface, with no alignment and no touchable metal.

Verschiedene prototypen

Not done - independent replication

A university electrical engineering department or accredited test house rebuilding and re-measuring to the same protocol.

Reserve-prototyp $500.00

2,500 begrenzte prototypenplätze. Registered legal entities only. Eine Reservierung garantiert keine sofortige Lieferung sichert jedoch eine priorisierte FIFO-Zuteilung.

FAQ

Häufig gestellte fragen

Drahtloser Prototyp FAQ
  • Who is allowed to reserve a unit?

    Registered legal entities only. Reservations are accepted from companies, institutes, universities and other registered organisations acting in the course of their business or research activity. Company name, tax identification number (PIB) and company registration number (MBR) are mandatory at checkout. Private individuals acting as consumers cannot reserve a unit. Orders that turn out to have been placed by a consumer are cancelled and refunded in full.

  • Was deckt meine reservierung ab ($500.00)?

    Die reservierung sichert ihren platz in der ersten prototypen-charge (2,500). Es ist nicht erstattungsfähig. Und gewährleistet Priorität bei der First-In-First-Out FIFO-Zuteilung. Die endgültige lieferung erfolgt erst wenn die gesamte charge finanziert und rechtlich für den versand freigegeben ist.

  • Wann zahle ich den Restbetrag?

    $2,000.00 der restbetrag wird erst angefordert nachdem alle reservierungen eingegangen sind (2,500), und die behördliche genehmigung oder rechtliche erlaubnis für den versand ist bestätigt, dies gewährleistet sicherheit und compliance.

  • What exactly has been proven?

    Three demonstrators have been built and recorded on video: a bench transmitter and receiver pair, a cordless LED lamp, and a USB charging puck. Power transfer at roughly one metre has been observed on the bench by the founder. No third party has measured any of it.

  • Is it certified or safety tested?

    Nein. There is no FCC, CE or other certification. Formal EMC and human-exposure assessment against FCC Part 18 and IEC 62311 has not been carried out. Informal checks with consumer devices showed no observable disruption, but that is not a measurement, and until one exists no claim about safe operating power levels can be made. This is precisely why units are supplied only to registered organisations for their own testing, never to consumers.

  • What about the patent?

    There is no live application. A utility provisional was filed with the USPTO under 35 U.S.C. 111(b) but was not converted within the twelve-month window, so there is no priority date today. An unconverted provisional is never published, so the implementation has not entered the public record. Patentability and freedom-to-operate opinions come before any new filing.

  • Was ist wenn die lieferung durch rechtliche beschränkungen verzögert wird?

    Die lieferung erfolgt nur wenn sie gesetzlich zulässig ist. Durch Reservieren, the buying company acknowledges that timing depends on independent measurement and regulatory clearance, not on an internal schedule.

Schritt eins - erledigt

Arbeitsprozess

Dieses projekt folgt einem kontrollierten, schrittweiser entwicklungszyklus. Jede phase konzentriert sich auf forschung, validierung, und verfeinerung zur sicherstellung der sicherheit, experimentell, und die pädagogische nutzung des prototypgeräts.

Forschungsphase

Erste forschung und theoretische modellierung von prinzipien der drahtlosen energieübertragung, bewertung der machbarkeit und sicherheitsaspekte des prototyps.

Schritt zwei - erledigt

Prototypendesign und -entdeckung

Iteratives design, testen, und entdeckung optimaler konfigurationen. Frühe prototypen werden für laborbewertungen gebaut, thermische stabilität, signalldämmung, und kontrollierte energieabgabe.

Entdeckungsphase

Ingenieuriterationen verfeinern designparameter und bewerten umweltinteraktionen um konzeptionell sichere experimentelle nutzung zu gewährleisten.

Schritt drei - ausstehend

Validation - pending

Independent measurement, safety review and a repeatable build. Focus is on independent measurement, EMC pre-compliance and a repeatable reference design, alongside FIFO allocation of the reserved batch (2,500).

Prototypvalidierung

Alle Reservierungen werden verfolgt, and independent measurement plus regulatory clearance are addressed before requesting the remaining payment and starting manufacturing.

  1. Forschung

    Erforschung theoretischer und experimenteller prinzipien der drahtlosen energieübertragung über große entfernungen.

  2. Entdeckung

    Exploring methods, materials and energy-transfer behaviours on the bench.

  3. Prototypenentwurf

    Erstellung erster testprototypen für experimentelle und bildungszwecke.

  4. Validierung

    Independent laboratory measurement - not yet carried out.

  5. Batch-planung

    Reservierungen organisieren, First-In-First-Out-Zuordnung, und Vorbereitung auf die produktionsreife Prototypenfertigung.

  6. Vorproduktion

    Completing EMC and human-exposure testing before the final balance payment is requested and any unit is delivered.