Wirelessgy
Azienda di sviluppo prototipi

3

Working demonstrators

~1

Bench range in metres

0

Independent measurements

2,500

Unità disponibili

Prototipo di riserva $500.00

2,500 fasce di prenotazione - disponibilità limitata

Registered legal entities only. Company name, PIB and MBR are required at checkout. Consumers cannot reserve a unit.

Engineering status

Built and demonstrated. Not yet independently measured.

Built by a founder with an M.Sc. in electrical and computer engineering. The prototype couples a transmitter and a receiver through an oscillating electric field between conductive surfaces, so there is no coil pair and nothing to align. Bench observations indicate power transfer at roughly one metre. These are founder-observed results on hand-built hardware, presented as indicative only, pending independent measurement.

Demonstrated on video

Three functional demonstrators: a bench transmitter and receiver pair, a cordless LED lamp, and a USB charging puck. Named in the United Inventors Association UIA Inspire Top 24 of 2024 - recognition of the concept, not a technical measurement.

Non-magnetic coupling

Operates without induction coils, accoppiamento magnetico, or directed energy beams.

Not independently verified

Efficiency, range and field-exposure figures have not been replicated or measured to a published protocol by any third party.

Not certified

No FCC, CE or other certification. Informal checks with consumer devices in and around the field showed no observable disruption, but formal EMC and human-exposure measurement has not been carried out.

Panoramica della tecnologia

Trasmissione Di Energia Senza Fili A Lunga Distanza

A non-magnetic, metodo non induttivo per trasmettere energia elettrica attraverso laria, materials and confined spaces.

This prototype demonstrates an energy-transfer principle without magnetic resonance, Bobine, Fasci RF, lasers or direct conductors. The category is not empty: Qi pads use magnetic induction over millimetres, WiTricity licenses magnetic resonance over tens of centimetres, Energous and Ossia deliver milliwatt-level RF at a few metres, and Wi-Charge ships infrared systems needing line of sight. Each of those ships today and holds certifications this project does not. What differs here is the coupling mechanism, the absence of an alignment requirement, and behaviour in water. Bench observations by the founder indicate transfer at roughly one metre; no third party has replicated or measured them to a published protocol.

Prototipo di riserva $500.00

Business customers only - registered legal entities with a valid PIB and MBR.

Tecnologia di alimentazione senza fili
Ingegneria e conformità

Safety and exposure - the open questions

Human exposure and electromagnetic interference are the constraints that decide how much power this method may legally move. Neither has been measured.

Supplied for experimental and research use only. questo prototipo ha no FCC, CE or other certification. Thermal behaviour, contenimento del segnale, cross-material propagation and controlled output are all unquantified. Nothing here should be read as a safety claim.

Importante: Units are supplied only to registered legal entities for their own research and testing, never to consumers. The buying company is responsible for safe handling, for restricting access to qualified staff, and for compliance with the regulations of its own jurisdiction. Lazienda non si assume alcuna responsabilità o obbligo per lesioni, danno, o altre conseguenze derivanti dal suo utilizzo.

Prototipo di riserva $500.00
Test del prototipo
Ciclo di produzione e prenotazione

Prototype batch manufacturing - FIFO allocation

Reserve your company a place in the initial engineering prototype batch (2,500). Questo è un dispositivo di pre-produzione per la ricerca, education and experimental use. La consegna avverrà solo quando consentito dalla legge secondo le normative applicabili.

Reservations are accepted from registered legal entities only. Company name, tax identification number (PIB) and company registration number (MBR) are required. Consumer orders are not accepted and will be refunded. Disponibilità limitata (2,500). I tempi di consegna dipendono dalle autorizzazioni legali e dalla prontezza produttiva. Ogni prenotazione richiede una tariffa non rimborsabile pari al 20% del prezzo unitario ($500.00 di $2,500.00 USD). Una volta completate tutte le prenotazioni necessarie, i partecipanti pagheranno il saldo del prezzo residuo prima dellinizio della produzione. Lallocazione segue un ordine FIFO First-In-First-Out. Nessuna unità singola viene spedita fino a quando lintero lotto non è finanziato e la consegna è legalmente consentita.

The buying company acknowledges that this is a research prototype, not a certified commercial product, with no independently measured performance figures. Le specifiche possono evolversi durante le iterazioni ingegneristiche. A published, third-party test report is the milestone this project is working towards, and reservations fund that work.

Importante: La consegna avviene solo quando legalmente consentito. No claim is made here about efficiency, range or safe exposure levels beyond what has been observed on the bench. La società non si assume alcuna responsabilità per i ritardi, restrizioni normative, o risultati delluso sperimentale.

Prototipo di riserva $500.00
Ciclo di produzione e consegna
Why say it this way

Open to scrutiny

A one-person hardware project with a working prototype and no independent measurements. What it needs next is a laboratory willing to measure it and an engineer willing to sign the result. The reservation batch is open to companies who want a unit on their own bench while that work is done.

Coupling

What is claimed

Power transfer at roughly one metre, observed on the bench, with no alignment and improved behaviour in water.

Construction

What is not claimed

No efficiency, range or exposure figure has been measured to a protocol, and no certification exists.

Why say so openly

Stating the limits

An unmeasured claim is worth nothing to a serious laboratory or industrial buyer. The buying company acknowledges the experimental nature of the device and accepts the usage risk on its own account.

Open to measurement

Prenota in anticipo e partecipa

Secure your company a place in the FIFO batch (2,500). Reservations are open to registered legal entities only - company name, PIB and MBR are required.

Prototipo di riserva $500.00

2,500 slot prototipo limitati. Registered legal entities only. La prenotazione non garantisce la consegna immediata.

Validation roadmap

What has been demonstrated, and what comes next

The first three items have been built and recorded. The remaining three have not been carried out. A published third-party test report is the asset this project needs next, and the reservation batch is what funds it.

Test del prototipo

Done - bench transfer

A transmitter and receiver pair moving power across open space at roughly one metre, recorded on video. Founder-observed, not measured to a protocol.

Valutazione ingegneristica

Partly - informal checks only

Consumer devices placed in and around the field showed no observable disruption. That is a smoke test, not a measurement. Formal pre-compliance against FCC Part 18 and IEC 62311 remains outstanding.

Dimostrazione di sicurezza sperimentale

Not done - instrumented bench test

Calibrated power in and out, with an efficiency-versus-distance curve and error bars, repeated across builds.

Test di prototipo subacqueo

Done - submerged transfer

Power moved between two sealed electrodes in a water bath - the case induction cannot serve. Recorded, not quantified.

Test su materiali incrociati

Done - two receivers, one transmitter

A cordless LED lamp and a USB charging puck running together anywhere on the same plastic surface, with no alignment and no touchable metal.

Diversi prototipi

Not done - independent replication

A university electrical engineering department or accredited test house rebuilding and re-measuring to the same protocol.

Prototipo di riserva $500.00

2,500 slot prototipo limitati. Registered legal entities only. La prenotazione non garantisce la consegna immediata ma assicura lallocazione prioritaria FIFO.

FAQ

Domande frequenti

FAQ prototipo wireless
  • Who is allowed to reserve a unit?

    Registered legal entities only. Reservations are accepted from companies, institutes, universities and other registered organisations acting in the course of their business or research activity. Company name, tax identification number (PIB) and company registration number (MBR) are mandatory at checkout. Private individuals acting as consumers cannot reserve a unit. Orders that turn out to have been placed by a consumer are cancelled and refunded in full.

  • Cosa copre la mia prenotazione ($500.00)?

    La prenotazione garantisce il tuo posto nel lotto prototipo delle unità iniziali (2,500). È non rimborsabile. E garantisce priorità nellallocazione FIFO First-In-First-Out. La consegna finale avverrà solo una volta che lintero lotto sarà finanziato e legalmente autorizzato alla spedizione.

  • Quando pagherò il saldo rimanente?

    $2,000.00 il saldo residuo verrà richiesto solo una volta raccolte tutte le prenotazioni (2,500), e lapprovazione normativa o il permesso legale per la spedizione è confermato, questo garantisce sicurezza e conformità.

  • What exactly has been proven?

    Three demonstrators have been built and recorded on video: a bench transmitter and receiver pair, a cordless LED lamp, and a USB charging puck. Power transfer at roughly one metre has been observed on the bench by the founder. No third party has measured any of it.

  • Is it certified or safety tested?

    No. There is no FCC, CE or other certification. Formal EMC and human-exposure assessment against FCC Part 18 and IEC 62311 has not been carried out. Informal checks with consumer devices showed no observable disruption, but that is not a measurement, and until one exists no claim about safe operating power levels can be made. This is precisely why units are supplied only to registered organisations for their own testing, never to consumers.

  • What about the patent?

    There is no live application. A utility provisional was filed with the USPTO under 35 U.S.C. 111(b) but was not converted within the twelve-month window, so there is no priority date today. An unconverted provisional is never published, so the implementation has not entered the public record. Patentability and freedom-to-operate opinions come before any new filing.

  • E se la consegna viene ritardata da restrizioni legali?

    La consegna avverrà solo se legalmente consentita. Prenotando, the buying company acknowledges that timing depends on independent measurement and regulatory clearance, not on an internal schedule.

Passo uno - fatto

Processo di lavoro

Questo progetto segue un controllo, ciclo di sviluppo graduale. Ogni fase si concentra sulla ricerca, validazione, e perfezionamento per garantire la sicurezza, sperimentale, e uso educativo del dispositivo prototipo.

Fase di ricerca

Ricerca iniziale e modellazione teorica dei principi di trasmissione dellenergia senza fili, valutando fattibilità e considerazioni di sicurezza per il prototipo.

Passo due - fatto

Progettazione e scoperta del prototipo

Progettazione iterativa, test, e scoperta di configurazioni ottimali. I primi prototipi sono costruiti per la valutazione in laboratorio, stabilità termica, contenimento del segnale, e uscita di energia controllata.

Fase di scoperta

Le iterazioni ingegneristiche affinano i parametri di progettazione e valutano le interazioni ambientali per garantire un uso sperimentale concettualmente sicuro.

Passo tre - in sospeso

Validation - pending

Independent measurement, safety review and a repeatable build. Focus is on independent measurement, EMC pre-compliance and a repeatable reference design, alongside FIFO allocation of the reserved batch (2,500).

Validazione del prototipo

Tutte le prenotazioni sono tracciate, and independent measurement plus regulatory clearance are addressed before requesting the remaining payment and starting manufacturing.

  1. Ricerca

    Esplorando i principi teorici e sperimentali della trasmissione di energia wireless a lunga distanza.

  2. Scoperta

    Exploring methods, materials and energy-transfer behaviours on the bench.

  3. Progettazione del prototipo

    Costruzione di prototipi di test iniziali per uso sperimentale e didattico.

  4. Validazione

    Independent laboratory measurement - not yet carried out.

  5. Pianificazione dei lotti

    Organizzazione delle prenotazioni, Allocazione First-In-First-Out, e preparando per la produzione di prototipi pronti per la produzione.

  6. Pre-produzione

    Completing EMC and human-exposure testing before the final balance payment is requested and any unit is delivered.